This video will guide you through conducting a Temperature Programmed Reduction (TPR) analysis using silver oxide reference material on the Micromeritics AutoChem II Automated Catalyst ...
Temperature programmed reduction (TPR) is an analytical technique that examines the surface chemistry of metal oxides under varying thermal conditions, an important factor in catalysis studies.
For the purposes of performing pulse and temperature-programmed chemisorption methods, which are used to characterize and test catalysts in-situ, the PID EFFI (Efficiency) microactivity reactor can be ...
Temperature control was solid too, with my motherboard’s heatsink keeping it down to a peak of 61 degrees Celsius during those three tests. When idle, its temperature was between 51 and 56 degrees, which shows that it has a slightly higher operating temperature than other drives but is more than manageable by even a standard motherboard heatsink.
The temperature can be written here by writing 1 to offset 0x22 (CRZN), then the fake temperature to offset 0x26 (TEMP). If we simultaneously write 0xFF to the fan control, the fan will turn off.
Discussion on troubleshooting HWMONITOR issues in Yosemite, including missing CPU temperatures, voltages, and fan speeds.
Hi, I am new in Hackintosh. I just completed the windows 10 installation on my dual boot system, and I noticed something, the GPU idle temperature on Catalina was much higher than on my windows 10. On macOS, the idle temperatures were about 50-57 °c , while on Windows 10, much lower at about...
gpu temperature info rx 580 8gb hi, what is the normal temperature of rx 580 8gb in mojave? thx.