Traditional synchronous boost converters offer little to no protection against short-circuit events at the output. Due to the boost converter’s topology, when the output is shorted to ground, a direct ...
This schematic is all you need to build your own voltage converter. [Lutz] needed a converter that could boost 5 V to 30 V to power a string of LEDs. The solution was to use low cost ATtiny85 and some ...
Electronic Design: Synchronous Boost Converter Powers High-Current LEDs Even at Low Input Voltages
Find a downloadable version of this story in pdf format at the end of the story. Boost power converters have been widely used for Power Factor Correction (PFC) in ac-dc conversions [1] and for power ...
Business Wire: EPC Introduces a 12 V – 48 V 500 W GaN Boost Converter Demonstration with Same BOM Size as Silicon, Offering Superior Efficiency and Power Density
EPC Introduces a 12 V – 48 V 500 W GaN Boost Converter Demonstration with Same BOM Size as Silicon, Offering Superior Efficiency and Power Density
A buck-boost DC/DC converter is one of the most valuable tools in a power supply designer’s toolbox for dealing with a variety of power conversion scenarios. In these situations, input voltages can ...
A high-efficiency buck-boost DC-DC converter was developed by the research team headed by Prof. CHENG Lin from the School of Microelectronics at the University of Science and Technology of China (USTC ...
What is an inductive-boost dc-dc converter? Closing the switch causes current to build up through the inductor, as shown in the simplified inductive-boost dc-dc converter circuit (Fig. 1). Opening the ...