How to Enable or Disable Energy Efficient Ethernet for a Modem During periods of low data activity, Energy Efficient Ethernet (802.3az EEE) allows for less power consumption by 50% or more while retaining full compatibility with existing equipment. If your modem (ex: Arris 6190) supports EEE, you could enable or disable EEE to reduce the power consumption of your modem while idle. This ...
Hi. Just fiddling around with settings of my main network interface (built-in I211-AT). Found this EEE (Energy Efficient Ethernet) 802.3az and conducted some investigations. It seems to issue LPI (low power idle) and similar (new) commands for the PHY level during idle periods of the link. All...
Enable or Disable Energy Efficient Ethernet for Modem - - - Updated - - - Try3 said: Peter, I would not be at all surprised if MS & the adapter driver writers had assumed that S0 Modern standby devices only had WiFi adapters and not Ethernet ones. Since you have referred to changing the Registry, I assume you have Windows 10 Pro. Denis
"Energy Efficient Ethernet" and "Green Ethernet" value set to disabled. 4. “ Power Options ” in “Control Panel”-> “Choose what the power buttons do” Clear the “ Turn on fast startup (recommended) ” check box. 5. All settings saved and PC restarted. In (2) above, there is no option on my setup for "Energy Efficient Ethernet".
So, I found the resolution looking at the datasheet from intel I211 In Windows: Disable fast startup in the device manager, in the driver properties and advanced tab, on top of enable: Wake on Lan, enable: Wake on Magic Packet, enable: Wake on Pattern Match, off: Energy Efficient Ethernet, Forced: wake on link settings, on: Wait on Link Finally: Enable PME shoule be enabled OBS: some of those ...