The platter mat and record thickness also play a role in the VTA. And since you'll likely have different thickness records, it doesn't make much sense to worry about it beyond initial set-up for an average thickness record. a 2mm spacer or 3mm seems to suit most aftermarket carts fine.
Technics SL 1200G Platter Height Increase / Lower VTA Discussion in ' Audio Hardware ' started by Ed Baker, .
I say to set the VTA using about a 150gram LP and let it be what it be on the Dynaflex and 200gram stuff. But that's one of the things that eliminated Rega on my new purchase list, what I think of as the Apple mentality. Sweet overall build quality though!
VTA Settings for relative pressing thicknesses Discussion in ' Audio Hardware ' started by Adagio, .
I made an SRA/VTA experiment with my Shure V15Vx and JICO SAS/B stylus. It is known that the VTA of these stylii are quite steep, around 30° effective...
The lowest VTA we have measured was 24° (even though the manufacturer claimed 20°) and the highest was 36°. Most cartridges have a VTA of between 28° to 32°. The VTA of Rega cartridge is approximately 28°. The Record: The VTA of a record cutting stylus is set to give the best continuous cut of the lacquer.
New turntable, first one with fully adjustable VTA and thought I would experiment and see how it sounded in various positions. Dynavector DV20X2L...
AT-VM95SH VTA Tail Up vs Tail Down Discussion in ' Audio Hardware ' started by matrix-6, .
AT-VM95SH VTA Tail Up vs Tail Down - Steve Hoffman Music Forums