As one of the fastest growing free TV networks, CHARGE! is all-in on police drama every day, including exciting weekend marathons you’ll love to binge.
Morning all, I have an MPPT charge controller rated for 40A, and can take an input of 12 or 24v, and output 12 or 24v.
Trying to understand how to best/properly determine the correct cable/wire size to use between two 440 Watt Solar Panels and an MPPT Charge Controller. The distance between the panels and the charge controller will be between 60 and 100 feet.
Hello, I have a 3KW Hybrid Inverter which has a PWM charge controller which has a max PV input of 30V. My solar panels have 40V output, is there a way that I can use the panels with the Inverter? Can I use an external MPPT charge controller and connect to a battery bank and at the same time connect the Inverter to the batteries? Thanks,
I attached my wiring diagram Here's the original story. I have a Morningstar MPPT-45. I did not have the system grounded, but the system worked great for a while until I tried hooking up my Battery Sense wire to my charge controller. The positive lead touched the case and started frying the board of the controller (it produced a nice buring smell). The two welds where I plug in the TS-M2 ...
Is there a rule for mixing different size panels to connect to an mppt charge controller? I have a set of 24V panels. (6) are 320 watt and (2) is 370watt.