H1000 Pilot Installation Manual Tinley Electronics

I've been playing with my 300 win Mag and the 220SMk's. I've tried RE 22, IMR 7828, H1000 and Retumbo now. So far my gun likes the H1000/75.0 grains, win cases, Fed 215M primers. Just shot 9/16" group at 200 yards (three shots) last weekend. The velocity spread was 2 for the three shots. This is a factory winchester rifle. Velocity 2689 at 70 ...

H1000 Pilot Installation Manual Tinley Electronics 1

I'll be running this rig with a 26" Douglas heavy varmint barrel 1:8 twist. New to long range shooting and was curious if anyone can offer any load suggestions. I went with the H1000 powder and 180 grain bullets, Peterson brass.

H1000 Pilot Installation Manual Tinley Electronics 2

Been playing with my 7PRC trying to find a load that I’m happy with. In the pics it’s not a fair comparison. The H1000 loads were five round groups at 300yds and the Retumbo loads were three round groups at 200yds. Would love to see what others are having success with. Tikka action 22” Proof...

H1000 Pilot Installation Manual Tinley Electronics 3

Hi there. Recently purchased a 300 WIN MAG, and decided to start initial loads with Hornady 208 gr AMAX bullets and H1000 powder, as used by...

H1000 Pilot Installation Manual Tinley Electronics 4

N570 has generally produced slightly higher velocities over H1000 in the bigger 30s I have tested. .300WM, .300PRC, 30 Nosler, .300RUM. But is harder on throats in a rifle that gets shot "a lot". 20-30 shots a year, from an already short barreled (velocity handicapped) would be fine with N570 for a long time. My own 300PRC will be trying H1000 first with 215s. Unless it doesn't like it for ...

H1000 Pilot Installation Manual Tinley Electronics 5

Good morning SH, I need some help choosing the correct load. Back story, I've ran load development with H1000, 56.2gr 2.3030" CBTO, but have ran out of...